Blog

Tell me about the adjustable shock

Tell me about the adjustable shock

Adjustable car suspension or adjustable shock absorbers can mean two things. Adjusting the driving height of the car or changing the driving characteristics. Ride height adjustment systems are usually added to the rear of vehicles to raise the rear of the car and even it out when heavily loaded. Adjustable shock absorbers can adversely affect handling and braking if the rear of the car is lower than the front, so it's clear how useful this system is. Height control systems can be located at all four corners, usually installed on luxury SUVs.

Aug 24, 2020
Introduction to Cast Iron Castings

Introduction to Cast Iron Castings

Cast iron has excellent fluidity due to the combination of high carbon and silicon content.The presence of iron in everyday life began around 1200 BC, covering a wide range of applications, from agricultural implements to weapons of war. Blacksmiths became a key profession, working with iron castings to change its properties and give the material a tool. There would be a forge in every village and town that produced sickles, plowshares, nails, swords, candlesticks, and more.

Aug 24, 2020
Surface grinding the old fashioned way

Surface grinding the old fashioned way

Whether it's for punching holes, grinding cutting tools, or precision forming tool steel for fixtures, every store has at least one surface grinder. Maybe you have a fully automatic model with all ringtones. Or maybe you are using a manual grinder from the 70s. Either way, it would be impossible to perform many daily store tasks without these much-needed machines.

Aug 21, 2020
Introduction to wire cutting

Introduction to wire cutting

Wire cutting or Electrical discharge machining (EDM) is a manufacturing process that implements electrical sparks to form a metal shape. Because of these sparks, EDM is also sometimes referred to as spark machining. In this process, the desired shape is cut from the metal when current discharges, or sparks, occur between two electrodes; where the sparking occurs, cuts are made into the metal, creating the desired shape and detaching it from the metal sheet. So this is why it is sometimes referred to as wire cutting.

Aug 21, 2020
The aerospace component and precision aircraft components market

The aerospace component and precision aircraft components market

Forty years ago, aluminum dominated the aerospace industry. As a new kid on the block, it was considered light, inexpensive, and state-of-the-art aircraft components. In fact, as much as 70% of airplanes were once made of aluminum. Other new materials were also used, such as composites and alloys, including titanium, graphite and fiberglass, but only in very small amounts - here 3%, there 7%. Readily available aluminum was used everywhere, from the fuselage to the main engine components.

Aug 21, 2020
Read this to understand Resistance Spot Welding

Read this to understand Resistance Spot Welding!

Resistance spot welding is a technology that uses heat generated by resistance to weld two pieces of metal together. The welding material is fixed together from above and below by copper electrodes connected to the welding power source for energization. When current passes through the part to be welded, the heat generated by the resistance melts and is incorporated into the material. In factory automation automatic resistance spot welding machines have been widely used in the connection process of production lines.

Aug 20, 2020
0Inquiry Item Contact MTS