A drill chuck arbor is a device that is connected to a drill chuck, and is used to keep the drill chuck rotating on the right track without misalignment. A drill chuck is used to hold and fasten the drilling tool steadily, and help the drilling tool operated through the rotating of the drill chuck. When the drill chuck works, it would rotate with high speed, which requires another force to hold the drill chuck in place, or there might be deformation on the products that are made by the drilling tool.
In the precision industries, the standardized and consistent precision is definitely the primary thing that they pursue. In addition to the operation and management that are performed by the experienced operators, the machines and other accessories are of significant importance as well. For a drilling work, the drilling tools may come in different sizes and shapes, and they are made following the standards, the only thing that should be done to maintain them is to keep them clean and lubricated, then they are able to perform well on their duties.
The other important accessory should be the drill chuck. The main purpose of using a drill chuck is to hold the relatively fine and thin drilling tool in place and rotate, in order to provide the drilling tool an extra security. To accommodate to the sizes of the drilling tools that are very thin, the drill chucks themselves would be small pieces. With the high speed of rotating, it is possible that the components would disperse. Therefore, the drill chuck arbors are required for holding and aligning the drill chuck, so as to prevent any problem that is caused from the instability of the drill chuck when the whole device is operated.
A drill chuck arbor is designed as a cylinder, with one end the thickest part, and tapers until the other end. There would be another part that is extended from the thickest part, which is supposed to be fitted into the body of the drill chuck. The extended part of the thickest part would be attached to the back of the drill chuck, and the thinnest end would be mounted on the other machine’s spindle. The drill chuck arbor is a simply designed accessory that does not directly perform works on the workpieces, while it is actually indispensable part during the procedure of drilling work.
Before installing a drill chuck arbor onto the drill chuck, the first thing you should do is to check the sizes. Whether the sizes of the drill chuck arbor or the drill chuck, the parts that are supposed to be attacked to each other must be perfectly fitted together.
So first, measure the diameter of the extended side of the drill chuck arbor and the inner diameter of the back of the drill chuck. Once you confirm that these two accessories are compatible with each other, then you can proceed to check if the two parts are clean or not.The cleanness of the two accessories is vital, because when there is dirt or debris between the drill chuck arbor and the drill chuck when they are connected, the way they are connected is out of precision, which makes them easily come apart.
When you make sure the two parts are clean, then insert the extended part of the drill chuck arbor into the back of the drill chuck, and twist the drill chuck arbor in order to fasten it into the drill chuck. For the purpose of make the optimal tightness of these two accessories, you can use a piece of wood and a hammer as the assistance. Put the drill chuck connected with the arbor upright on the table, and place the piece of wood onto them. Then use the hammer to give the wood a hit, in order to give then one good wrap. Then the installing of the drill chuck arbor and the drill chuck is complete.
The main purpose of using a drill chuck arbor is to align the drill chuck when the whole device is operated. When the drill chuck is rotating at a high speed, it is not only important that the drill chuck hold the drilling tool as firmly as possible, but the alignment of the drill chuck is also important. Thus, the aligning of the drill chuck must be the primary benefit of using a drill chuck arbor as well.
This would not be presented right away when the drill chuck arbor is applied. While using a drill chuck arbor would turn out prevent the deformation of the products that are made by the whole drilling process, which is another benefit of the drill chuck arbor.
IMTS Exhibition includes manufacturers from around the world. Send us a message with your requirements and our IMTS Experts will happily help you with your questions.
You can see all Drill Chuck Arbor categories